JM Plumbing Services logo

Shower Tray Materials: Stone Resin vs Acrylic and More

Stone resin, acrylic, ceramic or enamel? Compare shower tray materials for weight, feel, durability and cost, and learn which suits your Cardiff bathroom.

Shower Tray Materials: Stone Resin vs Acrylic and More

Low-profile stone resin shower tray in a bathroom

For most UK homes the best shower tray material is stone resin, or an acrylic-capped resin tray, because it feels solid underfoot, resists knocks and keeps its finish for years. Acrylic is the lighter, cheaper alternative and makes sense where weight, access or budget decide the job. But the material is only half the story: a tray is only as good as the floor and fitting beneath it, which is why the choice is best made together with the person who will install it.

This guide explains each material in plain terms, compares stone resin and acrylic head to head, and shows how to match a tray to your bathroom, whether that is a family bathroom, an en-suite or a step-free wet room.

Jmplumbingservicesltd
Plan a Bathroom That Fits
JM Plumbing Services Ltd installs bathrooms across Cardiff and the Vale of Glamorgan, combining expert plumbing with designs tailored to your needs.
Visit

TL;DR

  • Stone resin is the first choice for family bathrooms: rigid, solid underfoot, hard-wearing and usually repairable if chipped. It is heavy and costs more.
  • Acrylic is light, warm to the touch and the budget option. It suits guest bathrooms, upstairs rooms and tight access, but it flexes more if the floor is not right.
  • Ceramic and enamelled steel last well but are heavy or chip-prone, so they are less common in modern renovations.
  • Most cracked or creaking trays come from poor support underneath, not from the material itself, so fitting matters as much as the choice.
  • Check the slip rating and the tray height before you buy, especially for a walk-in or wet room design.

Table of Contents

What shower trays are made from

Walk into any bathroom showroom and you will meet five or six materials, but in practice three families cover almost every tray sold for UK homes.

Stone resin

Despite the name, a stone resin tray is not carved stone. It is a composite: crushed mineral, bound with resin, cast in a mold and finished with a hard surface layer. The result is dense and rigid. Many makers add a thin acrylic cap or a gel coat on top, so what your feet touch is a smooth, easy-to-wipe finish. Because the body is cast, it can be made slim, which is why stone resin dominates low-profile and flush-look designs.

You will also see variants sold as mineral composite, marble composite or cast marble. They share the same principle: a mineral-filled resin body that is heavy, stiff and long-lasting.

Acrylic

An acrylic tray starts as a sheet of acrylic that is heated and formed into shape, then stiffened underneath, often with glass-fiber reinforcement. A common variation is an ABS plastic tray capped with an acrylic surface. Either way, the tray is light enough for one person to carry upstairs, easy to cut to fit and the cheapest of the main materials.

The trade-off is stiffness. An acrylic tray has more give than a cast resin one, so it relies on a flat, fully supported base to stay quiet and sealed over the years.

Ceramic and enamelled steel

Ceramic trays are hard, glossy and easy to clean, but they are heavy and more brittle than modern composites. Enamelled steel is strong, smooth and resistant to scratches and heat, but a hard knock can chip the enamel. Both are still available, usually in traditional styles, and both are less flexible in size and height than resin or acrylic.

Natural stone, slate-effect and solid surface

Real stone trays are beautiful and expensive, and need sealing and careful handling. Slate-effect finishes on resin trays are popular because the texture adds grip. Solid surface trays sit at the premium end. For most Cardiff renovations these are specialist choices rather than the default.

Textured slate-effect resin shower tray surface

Stone resin vs acrylic: the comparison that matters

If you are choosing for a normal family bathroom, the decision comes down to these two. This table sets out how they compare on the points homeowners ask about most.

Stone resin Acrylic
Weight Heavy, often a two-person lift Light, easy to carry and cut
Feel underfoot Solid, no flex Comfortable, slightly more give
Durability Excellent, resists cracking and chipping Good, can scratch or chip more easily
Repairs Minor chips and scratches can usually be repaired with color-matched kits Surface damage often means replacing the tray
Profile Slim designs possible, ideal for low-profile and step-free looks Wide range of standard shapes and sizes
Cost Usually higher Usually lower
Best for Family bathrooms, high-traffic use, premium projects Guest rooms, upstairs bathrooms, tight access, budget-led updates

These points are consistent across the UK buying guides we reviewed, including Showers To You’s 2026 comparison, which recommends stone resin for long-term investment and busy family bathrooms and acrylic for lighter-use rooms.

Weight: the practical difference

This is the difference you will notice on installation day. A large stone resin tray is a serious lift, and the floor underneath it has to be solid. An acrylic tray is far easier to carry up narrow stairs and to trim if the alcove is not perfectly square. If your bathroom is on the first floor of an older Cardiff terrace, ask whether the floor and the stair route suit a heavy tray before you fall in love with one.

Warmth: a common myth

People often say acrylic feels warmer and stone resin feels cold. In practice, most stone resin trays carry a thin acrylic top layer, so your feet touch similar surfaces either way. Stone resin is also good at holding heat once it has warmed up. In a cold, unheated bathroom you may notice a stone resin tray at first touch, but it is not a reason to choose against it.

Cost: what to expect

Acrylic is generally the cheaper tray and stone resin generally costs more. The gap on the tray itself is usually modest compared with the whole job, because labor, waterproofing, waste fittings, tiling and the enclosure make up most of a bathroom budget. For context, our published price for a full bathroom renovation in Cardiff is £2,500 to £4,000, so the tray is one part of a larger package rather than the main cost.

Do stone resin trays crack?

This is one of the most common questions, and the honest answer is that any tray can crack if it is not installed properly. The cause is almost never the material alone.

When a tray is stuck down on a few patches of adhesive, or on a floor that is not level, parts of it are left unsupported. Every step then flexes the tray slightly. Over months, that movement can crack the tray or break the silicone seal, and water gets behind it. Acrylic fails in the same way, it just bends further first. Used normally and fitted on a fully supported, level base, a stone resin tray is dense and resistant to cracking and can last for decades. Heavy impacts, such as dropping a heavy object, can chip it.

Two practical points follow:

  1. Level and supported base. The floor under the tray must be flat and strong enough, with a gentle fall toward the waste so water drains properly.
  2. Compatible adhesives and sealants. Mineral resin and acrylic do not always take the same products, so the sealant used has to suit the tray material.

If you already have a tray that creaks underfoot, that is a sign of exactly this problem. Our guide to a creaking shower tray explains the causes and when to call a pro.

Slip resistance and safety

A wet tray is where most bathroom slips happen, so surface grip deserves as much thought as looks. Ask for the slip rating of any tray you are considering. Some makers publish it: for example, Merlyn states that its Touchstone stone resin tray achieved a wet-condition slip resistance value above the required 36 mark and Class C in the DIN 51097 barefoot ramp test, which places it in the premium class. A textured, slate-effect surface generally gives more grip than a smooth one, which matters most for children, older relatives and anyone with limited balance.

If you are planning for an older family member, our pages on bathroom safety for seniors cover layouts and features that make a shower easier and safer to use.

Care matters for the finish too. For stone resin, clean with hot soapy water and a soft cloth or brush, and avoid scourers, abrasive cleaners and hydrochloric acid, which can discolor the surface, as the same manufacturer’s care notes advise. Acrylic has a softer surface, so non-abrasive cloths and mild, pH-neutral cleaners help it stay glossy. In hard-water areas, wiping the tray dry after use slows limescale build-up on either material.

Slip resistance and safety

Which material suits which bathroom

The right tray depends on who uses the shower, where it goes and how it will be installed. Use these scenarios as a starting point.

Busy family bathroom

With children, daily showers and plenty of knocks, stone resin is the safer long-term choice. It is rigid, does not flex and shrugs off the dropped shampoo bottle. If a chip does happen, it can usually be repaired rather than replaced.

Upstairs bathroom or tight access

Acrylic, or an acrylic-capped tray, is easier to carry up narrow stairs and easier to cut to fit awkward alcoves. If the floor is a suspended timber one, ask your fitter to check that it can carry the weight of a stone resin tray plus a bather before you commit.

Guest bathroom or rental-style update

Where the shower is used lightly, or the aim is a tidy refresh on a budget, acrylic gives a clean result at a lower cost. It is also the quicker option if you are swapping like for like.

Walk-in shower or wet room

For a step-free or low-profile look, slim stone resin trays are the usual choice, because they can be made shallow and stay stiff. A hybrid option is a lighter composite with an acrylic top layer, which aims to give a resin feel without the full resin weight. For a true wet room, with no tray at all, the floor is formed and waterproofed to fall toward a drain and then tiled. Our guide to tileable shower trays covers that route, and our walk-in shower ideas show how different layouts work in UK homes.

Adding value to your home

Buyers notice a bathroom that feels solid and finished. A well-fitted stone resin tray with a clean seal and good tiling reads as quality in a way a flexing, creaking tray never does. Tiling and flooring around the tray complete the look, and we cover both in our tiling services and LVT and vinyl flooring.

A simple checklist before you choose

  1. Check the floor. Is it solid concrete or suspended timber? Is it level? This decides how heavy a tray you can use.
  2. Measure the route. Can two people carry a heavy tray through the door and up the stairs?
  3. Decide on height. A raised tray is simplest. A low-profile or flush tray needs more planning of the waste and pipe run.
  4. Check the slip rating. Ask for it, and choose a textured surface where grip matters most.
  5. Match the waste and sealant to the material. The tray, waste and sealant should be chosen as a set.
  6. Plan the whole bathroom. Tray, enclosure, tiling and plumbing should be decided together so nothing clashes.

Why the fitting matters more than the label

When a tray goes wrong, homeowners tend to blame the material. In most cases the problem is underneath: a floor that was not flattened, a tray that was not fully supported, the wrong sealant, or a waste that was not connected properly. These are plumbing and building jobs, not showroom jobs, and they are where an accountable fitter earns their fee.

That is the reason to avoid splitting a bathroom between a showroom that sells the tray, a builder who prepares the floor and a separate plumber who connects the waste. When each party only owns a part of the job, a leak or a creak becomes everyone else’s problem. One local team that handles the plumbing, tiling and finish means one person to call.

Our view on shower trays

We fit shower trays and wet rooms across Cardiff and the Vale of Glamorgan, and our advice is simple: pick the material to suit the room, then give the base as much attention as the tray.

For most family bathrooms we would point you to stone resin, because it is rigid, hard-wearing and keeps its finish. Where weight or access is a problem, an acrylic tray done properly is a sound choice too.

What we would not do is treat the tray as a product to be dropped in. A bathroom works when the plumbing, the floor, the tiling and the sealing are planned as one job by one team, and that is how we work: no upselling, no showroom markup, and fixed pricing so you know where you stand.

James

Plan your shower tray with a local team

If you are thinking about a new shower tray, a walk-in shower or a full wet room, we can handle the plumbing, tiling and finishing as one accountable local team across Cardiff and the Vale of Glamorgan. Our full bathroom renovation service in Cardiff is published at £2,500 to £4,000, and our wet room conversions and installations cover both tray-based and tiled-floor designs. We also have 25 verified 5-star Google reviews from local customers.

Jmplumbingservicesltd

If you are in Barry or the surrounding area, see our bathroom fitters in Barry page, or contact us through our main site to talk through your plans.

FAQ

What is the best shower tray material?

For most family bathrooms, stone resin is the best all-round material because it is rigid, solid underfoot and durable. Acrylic is the better pick where you need a lighter tray, a lower price or easy handling in a tight space. The right answer depends on your floor, access and budget.

Is stone resin better than acrylic?

Stone resin is stronger, stiffer and easier to repair, which is why it suits busy bathrooms and premium projects. Acrylic is lighter, cheaper and simpler to install, so it suits guest rooms, upstairs bathrooms and budget updates. Neither is better in every situation.

Do stone resin shower trays crack?

Normal use is unlikely to crack a stone resin tray, because the material is dense and resistant. Cracks usually follow poor installation, such as an unsupported or uneven base, or a heavy impact. A properly fitted tray on a level, fully supported floor can last for decades.

Which tray suits a walk-in shower or wet room?

Slim, low-profile stone resin trays are the usual choice for a walk-in look, as they can be made shallow and stay stiff. For a fully step-free design, a tiled wet room floor formed to fall toward a drain is the alternative. Your fitter should check the floor and pipe run first.

How do I keep a shower tray looking new?

Wipe it down with hot soapy water and a soft cloth, and avoid scourers, abrasive cleaners and strong acids. Use non-abrasive cloths on acrylic. Drying the tray after use helps limit limescale in hard-water areas.

Sources

Ready to get this sorted?

Get a free, fixed-price quote and we'll take it from here.

Shower Tray Materials: Stone Resin vs Acrylic and More